Description
Applications |
|
| For use on all fractures with fine or coarse pores or damage to metal, wood, porcelain, ceramics, plastic, rubber, etc. Filler consists of fine crystal granules with a special adhesion-promoting primer coating, which improves the filling properties of cyanoacrylate adhesives. Good filling capacity. Reaction speed of a few seconds and rock-hard curing. Suitable for almost all materials, also in combination, waterproof, temperature and chemical resistant, sandable, paintable. Not suitable for paper, polystyrene, Teflon, polyethylene, and polypropylene. |
|
Application Guidelines |
|
| When processing, do not allow the tip of the bottle to come into contact with the adhesive. Surfaces to be bonded must be free of oil, dust, and grease.Bonding: Apply granules approximately 1 mm thick on one side or as a void filler. Apply adhesive thickly to the other side. Bring parts to be bonded together and press firmly. Immediately after joining, coat the fracture line with adhesive if necessary, so that the granules absorb the adhesive well. For flat objects, positioning and joining the parts to be bonded should even work on difficult-to-bond substrates such as glass, PP, and PE. Filling: |
These values are averages and are for informational purposes only. No rights can be derived from this information.
The TDS/MSDS sheet is available upon request.
