Super-Fix Black Filler Blister
Super-Fix Black Filler Blister

SKU: 1602002BL

Super-Fix Black Filler is used for extremely strong bonds in spot bonding and for materials that no longer fit together exactly. For use in filling cracks and holes, and for reinforcing and joining materials. Can be machined after curing if necessary.

Verwerkingstijd: 1 sec.
Verwerkingstijd: 1 sec.
Schuren
Schuren
Geschikt voor elke verf
Geschikt voor elke verf
Sterk
Sterk
Hard
Hard


  • Our products are available exclusively through specialist wholesalers.

Description

Applications
For use on all fine or coarse-pored fractures or damage to metal, wood, porcelain, ceramics, plastic, rubber, etc. The filler consists of fine crystalline granules with a special adhesion-promoting primer coating, which improves the filling properties of cyanoacrylate adhesives.
Excellent filling capacity. Reaction time of a few seconds and rock-hard curing. Suitable for almost all materials, including in combination; waterproof, temperature and chemical resistant, sandable, and paintable. Not suitable for paper, polystyrene, Teflon, polyethylene, and polypropylene.

Application Guidelines
When applying, do not allow the tip of the bottle to come into contact with the adhesive.
Surfaces to be bonded must be free of oil, dust, and grease.

Bonding:
Apply granules approximately 1 mm thick to one side or as a void filler. Apply a thick layer of adhesive to the other side. Join the parts to be bonded and press firmly. Immediately after joining, apply adhesive to the fracture line if necessary so that the granules absorb the adhesive properly. For flat objects, positioning and joining parts should even be successful on difficult-to-bond substrates such as glass, PP, and PE.

Filling:
Apply this filler into the hole or crack and then apply sufficient adhesive.

These values are averages and are for informational purposes only. No rights can be derived from this information.

The TDS/MSDS sheet is available upon request.

Related products

Related products